192.168.0.1 is the IP Address used to login into Routers. Manufacturers like D Link, NetGear, Linksys are using 192.168.01 IP Address as Default IP to Login to Routers. You can use this IP Address to log in to your Router and change Wifi Password and IP Address also. Now the question is how to do this? Here in this article, we are going to share the complete guide on how to use 192.168.0.1 Admin Login.
Without Router login IP address, you cannot log in into the router console. If you are using Router in Home or Office, you have to customize it. You have to restrict other users to access your Internet via your Router. The first step is to change WiFi Name and also set a new WiFi Password. Also, you have to change the Router Password.
Among default IP address, 192.168.0.1 IP address is used in many routers which are set default by manufacturers. This IP address is used only by Linksys routers. If you want to get connected with routers then you should put 192.168.0.1 IP address in the browser and then you see a login screen where if you put correct username and password then you will get next step option to connect with internet. If you cannot get access in the routers that’s mean you have an error in configuration. Different vendors use different types of IP address but all of their IP address starts with 192.168 which is very common among them.
192.168.0.1 Admin Login – 192.168.o.1 Router
Using 192.168.0.1 IP address you can take enter in the router management console and change the default settings like username and password which is set by the manufacturer. 192.168.0.1 IP address is used as a private network and it is already connected with the internet. When this is connected with several computers by sharing a same ISP internet connection then home computers do not get connected directly. It is better to change your default settings which is necessary to increase network security. As it is not connected with ISP from downstream that is why your PC is safe from different viruses and trojan.
You can find Router IP address using CMD command in Windows. Go run> type cmd and press enter.
Type ipconfig > Press Enter. This will list down all the Network related information with Router IP address also.
If you see that you are receiving error message continuously or not getting a login screen, then you have to understand that is something wrong in your PC or router. You may have typed wrong IP address which 192.168.0.1.1 but it should have been 192.168.01. The default IP address is 192.168.0.1 is set in the router which allowed to use within the home. Usually, it is set in the router by the manufacturer. It is used by manufacturers to get access to the administrative console of the router. In the administrative console 192.168.0.0 to 192.168.255.255 IP address is put.
How to Login to Router with 192.168.0.1 IP address
Step 1: Connect your Router and Computer with a Network cable(RJ45).
Step 2: Now open a browser on your computer and then type 192.168.0.1 in the URL bar. Press Enter.
Step 3: Now you asked for username and password.
- Username: admin
- Password: admin/pass
Step 4: Thats’t it. You have successfully logged into your Router. Now you can change Router WiFi Password and Wifi Name Also.
192.168.0.1 IP address is usually used in a network of LAN by network router or modem. If you want to access administrative control, then you have to use 192.168.0.1 IP address in the web browser. If you type right IP address 192.168.0.1, then you must get a login screen where you may put username and password to get an internet connection. If you do not know the default login settings username and password, then you will find those in the user manual, or you can visit the manufacturer’s website. The same IP address is not used in various routers then you may get an error report.
If you like you can change the default settings like default IP address, username or password, etc. Changing the default Ip address is a good idea to avoid a clash. You can take help from online if you do not know how to change default settings. Manufactures gives permission to use the private address of 192.168.1.1 or IP 192.168.2.1.
If a user is uncertain about the IP address, then he can check the browser or he uses ‘IPCONFIG’ command in the CDM(Command prompt) to know Ip configuration detail.